PPR水管连接?
PPR水管连接的方式主要采用的是热熔。在进行热熔连接前，要将管道的的两端上的尘土及污渍清除掉。在用熔接机加热管材的及管材的配件，当管材的极其的管件的热熔深度及时间达到一定的要求后，可进行管材的热熔焊接。?
PPR water pipe connectionThe main connection mode of PPR water pipe is hot melting. Before the hot-melt connection， the dust and stains on both ends of the pipe should be removed. When the welding machine is used to heat piPES and pipe fittings， when the hot-melt profundity and time of pipes and pipe fittings meet certain requirements， the hot-melt welding of pipes can be carried out.
直接头：当水管不够长时，可以通过直接头连接两根管子来延伸。
弯头：用于改变水管的方向，PVC管业生产，分为45°弯头和90°弯头。
三通：水管需要分路时，连接管子用。
堵头：主要用来暂时封闭出水口，等安装水阀时再取下。
Direct head: when the water pipe is not long enough， it can be extended by connecting two pipes with the direct head.Elbow: used to change the direction of water pipe， divided into 45 parts ° Elbow and 90 ° Elbow.
Tee: when the water pipe needs to be shunted， it is used to connect the pipe.
Plug: it is mainly used to temporarily close the water outlet and remove it when installing the tap.
当管件连接不正后，在安装整段管路系统时，PVC管业加工，采用管卡将三通、弯头等管件硬性扳正，则会使管道系统长时间承受较大的应力，导致一些熔焊不好的位置在一段时间后容易产生泄露。所以在熔焊前，PVC管业图片，先预安装，用笔画标记线；在正式连接时只要对齐该标记线就可以了。
When the pipe fittings are not connected correctly， when installing the whole pipeline system， the pipe fittings such as tee and elbow are rigidly straightened by pipe clamps，黄浦区PVC管业， which will cause the pipeline system to bear large stress for a long time， which will lead to leakage in some places with poor fusion welding after a period of time. So before welding， pre install and mark line with strokes; Just align the marker line when you are formally connected.
PVC管业图片-Gafloon卡弗龙-黄浦区PVC管业由台州艾菲力塑胶有限公司提供。台州艾菲力塑胶有限公司拥有很好的服务与产品，不断地受到新老用户及业内人士的肯定和信任。我们公司是商盟认证会员，点击页面的商盟客服图标，可以直接与我们客服人员对话，愿我们今后的合作愉快！同时本公司还是从事PPR管，地暖管，PVC管的厂家，欢迎来电咨询。
