氧化诱导期试验机、氧化诱导时间试验机、氧化诱导时间测试仪

产品名称 氧化诱导期试验机、氧化诱导时间试验机、氧化诱导时间测试仪
生产厂家 承德市万吉仪器仪表制造有限公司
价格 0.00/个
品牌 承德市万吉仪器仪表制造有限公司
规格参数 暂无
公司地址 开发区东区
联系电话 03142266829

产品详情

为您提供氧化诱导期oit试验机、氧化诱导期试验机、氧化诱导时间试验机、氧化诱导时间测试仪。氧化诱导期(oit)试验机,氧化诱导期试验机,氧化诱导时间试验机,氧化诱导时间测试仪
  一、产品介绍:
  氧化诱导时间试验机是在过程控制温度下,测量物质与参比物之间的温度差与温度关系的一种技术,还可测定物质氧化诱导时间。差热分析曲线是描述样品与参比物之间的温度(△t)随温度或时间的变化关系。在dta试验中,样品温度的变化是由于相转变或反应的吸热或放热效应引起的。如:相转变,熔化,结晶结构的转变,沸腾,升华,蒸发,脱氢反应,断裂或分解反应,氧化或还原反应,晶格结构的破坏和其他化学反应。
  二、性能特点:
  1. 炉体小型化;
  2. 测温和控温采用pt100铂电阻,温度读数精度高,长期恒温精度可达0.1℃;
  3. 高分辨率a/d(24位)数据采集;
  4. 智能化的温度控制系统;
  5. 采用数字气体质量流量计由计算机控制气路的切换和控制流量大小;
  6. 高精度低漂移微伏放大器;
  7. 优良的计算机数据处理系统软件。操作简单,无需面板操作,全部由计算机界面操作;
  8. 快速升降温。
  三、主要技术参数:
  1. 温度范围: 室温~1150℃;
  2. 量程范围: 0~±2000μv ;
  3. dta精度: ±0.1μv ;
  4. 升温速率: 1~80℃/min;
  5. 温度分辨率: 0.1℃;
  6. 温度准确度: ±0.1℃;
  7. 温度重复性: ±0.1℃;
  8. 温度控制: 升温:过程控制(可根据需要进行参数的调整);
  降温:风冷式,过程控制 (可选配半导体冷却系统、液氮冷却系统等);
  恒温:过程控制(恒温时间任意设定);
  9. 炉体结构: 炉体采用上开盖式结构,代替了传统的升降炉体,精度高,易于操作;
  10. 气氛控制: (选配)气体流量计,气氛转换装置;
  11. 气体:氮气、氧气;
  12. 气体流量:≤100ml min;
  13. 坩埚:铝,直径6.7mm;
  14. 数据接口: rs-232串口通讯 配套数据线和操作软件;
  15. 主机显示: 24bit色7寸 lcd真彩触摸屏显示;
  16. 参数标准: 配有标准物,带有一键校准功能,用户可自行对温度进行校正;
  17. 基线调整: 用户可通过基线的斜率和截距来调整基线;
  18. 工作电源: ac220v/50hz。
It provides you with oxidation induction period oit testing machine, oxidative induction period testing machine, oxidative induction time testing machine, oxidative induction time tester.
Oxidation induction period (oit) testing machine, oxidative induction period testing machine, oxidative induction time testing machine, oxidative induction time tester
I. product introduction:
The oxidative induction time testing machine is a technique of measuring the temperature difference between the material and the reference object at the temperature of the process control, and can also measure the time of the oxidation of the material.
The differential thermal analysis curve is the relationship between the temperature of the sample and the temperature (delta t) with the temperature or time.
In dta test, the change of the sample temperature is caused by the heat or exothermic effect of phase transition or reaction.
Such as phase transition, melt, the change of crystalline structure, boiling, distillation, evaporation and dehydrogenation reaction, fracture or decomposition reaction, oxidation and reduction reaction, the destruction of the lattice structure and other chemical reactions.
Ii. Performance characteristics:
1. Miniaturization of furnace body;
2. The temperature test using pt100 platinum resistance temperature control, high precision temperature readings, long-term constant temperature precision can reach 0.1 ℃;
3. High resolution a/d (24 bits) data collection;
4. Intelligent temperature control system;
5. The digital gas mass flowmeter is adopted to control the switching and control flow size of the gas circuit;
6. High accuracy and low drift microvolt amplifier;
7. Excellent computer data processing system software.
Simple operation, no panel operation, all computer interface operation;
8. Rapid temperature rise and cooling.
Iii. Main technical parameters:
Scope: 1. The temperature at room temperature to 1150 ℃;
2. Range of range: 0 ~ plus or minus 2000 mu v;
3. Dta precision:
4. The heating rate: 1 ~ 80 ℃ / min;
5. The temperature resolution: 0.1 ℃;
6. The temperature accuracy: plus or minus 0.1 ℃;
7. Temperature repeatability: plus or minus 0.1 ℃;
8. Temperature control: temperature rise: process control (adjusting parameters according to need);
Cooling: air-cooled, process control (optional semiconductor cooling system, liquid nitrogen cooling system, etc.);
Constant temperature: process control (arbitrary setting of constant temperature time);
9. Furnace structure: the furnace body adopts the open-cover structure, replacing the traditional lifting furnace body with high precision and easy operation;
10. Atmosphere control: (optional) gas flowmeter, atmosphere conversion device;
11. Gases: nitrogen, oxygen;
12. Gas flow: no more than 100ml min;
13. Crucible: aluminum, diameter 6.7 mm;
14. Data interface: rs-232 serial communication supporting data line and operating software;
15. The host display: 24bit color 7 inch LCD real color touch screen display;
16. Parameter standard: equipped with a standard, with a key calibration function, the user can adjust the temperature on its own;
17. baseline adjustment: users can adjust baseline by baseline slope and intercept;
18. Work power: ac220v/ 50hz.