1. 物料接触部分材质为耐磨合金，且表面光滑，不会对陶瓷物料产生污染。All parts that contact the material are made of wear resistant alloy and the surface is smooth which keep material away from pollution.
2. 采用38CrMoALA合金钢氮化72小时处理，抛光表面喷涂硬质合金.The 38CrMoALA alloy steel was nitrided for 72 hours， and the hard alloy was sprayed on the surface.
3. 混炼好的成团料直接投入造粒机料斗无需人工粉碎，直接造粒。Put agglomerate mixed material into the hopper of granulator directly and the material will be pelletized without manual crush.
陶瓷专用造粒机，昶丰陶瓷造粒机
1. 对密炼机混炼好的陶瓷团状物料进行强制喂料、减少传统式陶瓷造粒机还需要另外破损环节。
Equipped with Y cone to feed mixed ceramic material. Compared with traditional pelltizer，raw material can be directly pelletized without crushing.
2. 无需破损直接造粒，无粉尘，精简优化工序配置，降低过程污染，节省人力提高效率。
Directly Pelletizing.No dust，simplifed process and reduce pollution. Improving efficiency and labor saving.
3. 挤出造粒，有效的提高物料的致密度，颗粒均匀，提高后段喂料注射稳定性。
Raw material is extruded and pelletized.Compactness improved efficiently， pellets are well proportioned which will improve stability during injection.
1. 密炼室为“W"形，小型双锥造粒机，采用“M”形下加压盖，中山双锥造粒机，形成全封闭混炼空间。搅叶采用棱形螺旋无死角设计，使物料剪切分散达到物性要求。 W-shaped mixing chamber and M-shaped hammer to form a fully enclosed mixing space.The stirring blade is designed with a prismatic helix no dead angle， so the material can be sheared and dispersed to meet the requirements.
2. 与物料接触部分（密炼室/侧板/压锤/搅叶轴）采用优质高碳钢，经调质、高精度机加工，真空72小时深度氮化热处理后表面喷涂碳化钨，后做光洁度处理 耐磨，防腐蚀，不易粘料，使用寿命长。 The contact part with material (mixing chamber/side plate/hammer/stirring blade shaft) is made of high quality high carbon teel， which is tempered and machined with high precision. After 72 hours of deep nitriding heat treatment in vacuum， the surface is sprayed with tungsten carbide，after finishing， it is wear-resistant， corrosion-resistant， non-ticky and longer service life.
昶丰机械(图)-混炼机双锥造粒机-中山双锥造粒机由东莞市昶丰机械科技有限公司提供。东莞市昶丰机械科技有限公司（www.cfinejx.com）坚持“以人为本”的企业理念，拥有一支敬业的员工队伍，力求提供好的产品和服务回馈社会，并欢迎广大新老客户光临惠顾，真诚合作、共创美好未来。昶丰机械——您可信赖的朋友，公司地址：东莞市厚街镇溪头沙塘村京盟工业园1号，联系人：刘光桂。
