Xrw-300c thermal deformation, vesica softening point temperature tester
Product introduction;
XRW - 300 - c thermal deformation, vicat softening point temperature tester is mainly used for non-metallic materials such as plastic, rubber, nylon, plastic, rubber, nylon, electrical insulating materials, etc.) of the thermal deformation temperature and vicat softening point measurement.
The product has stable performance, high precision, simple operation and high degree of automation. It is the most advanced testing instrument for the deformation and softening temperature of non-metallic materials in China.
Applicable to colleges and universities, scientific research units, product quality supervision and inspection and chemical enterprises.
Two characteristics
1. The sample frame is a one-piece structure with small expansion coefficient, and the experimental data is accurate and accurate.
2. The lifting system is an integrated model with low noise.
3 tank with special structure, temperature uniformity, good accuracy maintain plus or minus 0.5 ℃.
The advanced silicon controlled temperature is adopted.
The displacement sensor is easy to adjust, with fine tuning and fine-tuning double adjustment
5. It can monitor the temperature of the test and the curve of the deformation quantity of the test, and draw the curve of temperature and deformation in real time in real time, and realize the historical memory disk and print the test report
6 in the experimental process and the inspection of historical reports, the interface automatically displays the deformation and temperature value of the temperature curve when using the mouse to click the deformation.
7. Automatically stop heating when the test temperature reaches the upper limit setting temperature.
The test rack has automatic lifting function
Three meets the standard:
ISO75, SN EN ISO 75-1-20 13 Plastics - Determination Of Temperature Of Deflection Under Load - Part 1: General Test Method (ISO...
ISO306 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
GB/T 1633-2000(idt ISO 306:1994) the determination of the temperature of the softening temperature (VST)
GB/T 1634.1-2004(idt ISO75-2:2003) plastic load deformation temperature measurement (general test method)
GB/T 1634.2-2004 plastic load deformation temperature measurement (plastic, hard rubber and long fiber reinforced composite)
GB/T 1634.3-2004 plastic load deformation temperature measurement (high strength thermosetting laminated materials)
GB/T 8802-2001(eqv ISO 2507:1995) the determination of thermoplastic pipe and pipe - dimension card softening temperature
Also meet the requirements of ISO 2507, ASTM D 1525,ASTM D 648, etc.
Main technical parameters
1 scope of temperature control: at room temperature to 300 ℃;
Heating rate: 120 plus or minus 10 ℃ / h (12 ℃ + / - 1 ℃ / 6 min)
50 + / - 5 ℃ / h (0.5 ℃ / 5 ℃ + 6 min)
3. Deformation measurement range: the deformation measurement range is 0 ~ 10mm, the deformation resolution is 0.001mm and the deformation measurement accuracy is 0.005mm
4 sample frame number: 3;
Sample span: 64 + 1 mm 100 mm 100 mm
Maximum heating power: 3kw;
7 cooling mode: natural cooling;
8 the heating medium: methyl silicone oil (below 200 CST viscosity, flash point above 300 ℃).
The host power supply is ac three-phase five-wire 380v plus or minus 10%, 50Hz, 5kw.
It has water cooling but circulatory system.
The 10 vicar load bar is equipped with a load plate, fixed on a rigid metal frame, and can move freely in the vertical direction.
The load bar and metal structure should have the same expansion coefficient.
The pressure needle is made of hard steel, 3mm long, and the cross sectional area is 1.000 + 0.015 mm2, the surface of the pressure needle should be flat, perpendicular to the axis of the load rod, without burr.
The size of 12 is 645mmx670mmx1450mm.
Xrw-300c thermal deformation, vesica softening point temperature tester
Product introduction;
XRW - 300 - c thermal deformation, vicat softening point temperature tester is mainly used for non-metallic materials such as plastic, rubber, nylon, plastic, rubber, nylon, electrical insulating materials, etc.) of the thermal deformation temperature and vicat softening point measurement.
The product has stable performance, high precision, simple operation and high degree of automation. It is the most advanced testing instrument for the deformation and softening temperature of non-metallic materials in China.
Applicable to colleges and universities, scientific research units, product quality supervision and inspection and chemical enterprises.
Two characteristics
1. The sample frame is a one-piece structure with small expansion coefficient, and the experimental data is accurate and accurate.
2. The lifting system is an integrated model with low noise.
3 tank with special structure, temperature uniformity, good accuracy maintain plus or minus 0.5 ℃.
The advanced silicon controlled temperature is adopted.
The displacement sensor is easy to adjust, with fine tuning and fine-tuning double adjustment
5. It can monitor the temperature of the test and the curve of the deformation quantity of the test, and draw the curve of temperature and deformation in real time in real time, and realize the historical memory disk and print the test report
6 in the experimental process and the inspection of historical reports, the interface automatically displays the deformation and temperature value of the temperature curve when using the mouse to click the deformation.
7. Automatically stop heating when the test temperature reaches the upper limit setting temperature.
The test rack has automatic lifting function
Three meets the standard:
ISO75, SN EN ISO 75-1-20 13 Plastics - Determination Of Temperature Of Deflection Under Load - Part 1: General Test Method (ISO...
ISO306 Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST)
GB/T 1633-2000(idt ISO 306:1994) the determination of the temperature of the softening temperature (VST)
GB/T 1634.1-2004(idt ISO75-2:2003) plastic load deformation temperature measurement (general test method)
GB/T 1634.2-2004 plastic load deformation temperature measurement (plastic, hard rubber and long fiber reinforced composite)
GB/T 1634.3-2004 plastic load deformation temperature measurement (high strength thermosetting laminated materials)
GB/T 8802-2001(eqv ISO 2507:1995) the determination of thermoplastic pipe and pipe - dimension card softening temperature
Also meet the requirements of ISO 2507, ASTM D 1525,ASTM D 648, etc.
Main technical parameters
1 scope of temperature control: at room temperature to 300 ℃;
Heating rate: 120 plus or minus 10 ℃ / h (12 ℃ + / - 1 ℃ / 6 min)
50 + / - 5 ℃ / h (0.5 ℃ / 5 ℃ + 6 min)
3. Deformation measurement range: the deformation measurement range is 0 ~ 10mm, the deformation resolution is 0.001mm and the deformation measurement accuracy is 0.005mm
4 sample frame number: 3;
Sample span: 64 + 1 mm 100 mm 100 mm
Maximum heating power: 3kw;
7 cooling mode: natural cooling;
8 the heating medium: methyl silicone oil (below 200 CST viscosity, flash point above 300 ℃).
The host power supply is ac three-phase five-wire 380v plus or minus 10%, 50Hz, 5kw.
It has water cooling but circulatory system.
The 10 vicar load bar is equipped with a load plate, fixed on a rigid metal frame, and can move freely in the vertical direction.
The load bar and metal structure should have the same expansion coefficient.
The pressure needle is made of hard steel, 3mm long, and the cross sectional area is 1.000 + 0.015 mm2, the surface of the pressure needle should be flat, perpendicular to the axis of the load rod, without burr.
The size of 12 is 645mmx670mmx1450mm.